Below is a list of the standard list of template reports available in Accuvio. Each is generated in under 10 seconds based on selections made by the user on the filters to the left hand side of the screen. There are currently 44 template reports available to use within the Accuvio system. The reports are listed below.

 

 Data Validation and Completeness Reports:

 

  • Audit and Verification Report – Complete and thorough listing of each piece of data for each facility and each activity broken down by each of the applicable Kyoto gases, in a fully verifiable and auditable manner. 
  • Data Entry Status Report – Complete listing of all outstanding data entry tasks by activity and facility – This report aids management to assess the completeness of the underlying data prior to any report being generated. 
  • Emissions Factor Sources Report – Supplementary to the Audit and Verification report, this report lists all the emissions factors employed for this companies emissions calculation. 
  • Global Warming Potentials Report - Supplementary to the Audit and Verification report, this report lists all the global warming potential factors employed for the companies’ emissions calculations. 
  • Gap Report Quantity Data by Site - This report shows where gaps in the data entry exist by facility for each activity. 

 

GHG Protocol Reports:

  • GHG Protocol – Emissions by Location - This popular format report displays a list of all facilities covered by the software by emissions activity source, with the Carbon Footprint in CO2e per facility – totalled at the bottom of the report. This report uses the GHG Protocol Terminology and reporting template 
  • GHG Protocol – Emissions by Scope - This popular format report displays a list of all facilities covered by the software by emissions activity scope, with the Carbon Footprint in CO2e per applicable scope – totalled at the bottom of the report. This report uses the GHG Protocol Terminology and reporting template. 
  • GHG Protocol – Emissions Inventory - This report provides an inventory of the organisations GHG emissions divided out into the different GHG protocol scopes. The report uses the GHG Protocol Terminology and reporting template. 
  • GHG Protocol – Audit and Verification report - This report allows user to audit their data using the GHG Protocol Terminology and reporting template. 

 

 ISO 14064-1 Reports:

  • ISO 14064-1 – Emissions by Location - This popular format report displays a list of all facilities covered by the software by emissions activity source, with the Carbon Footprint in CO2e per facility – totalled at the bottom of the report. This report used the GHG Protocol Terminology and reporting template. 
  • ISO 14064-1 – Emissions by Scope - This popular format report displays a list of all facilities covered by the software by emissions activity scope, with the Carbon Footprint in CO2e per applicable scope – totalled at the bottom of the report. This report used the GHG Protocol Terminology and reporting template. 

 

UK CRC Reports:

  • UK CRC Annual Report - This report provides the legislative required report by location for the UK’s Carbon Reduction Commitment. 
  • UK CRC Annual Report - Exemptions and Exclusions - This reports summarises a company’s CRC exemption and exclusions.   
  • UK CRC Annual Report – By Organisation -This report summarises CRC Electricity and Natural Gas By Organisations. 
  • UK CRC Annual Report – Registration Stage – This report provides the Electricity qualifying amount data details for CRC phase II registration.  
  • UK CRC Annual Report – Meter Report this provides all details on Meters within the system for example, meter number, meter type, serial number, quantity, site name, ID, industry sector, country name, address, parent organisation and the CO2 tonnes. 
  • UK CRC Audit Report - This report provides a complete and thorough listing of each piece of data for each meter and site in a fully verifiable and auditable manner. This report can be run for the CRC reporting periods and will help users to ensure data is accurate and audit ready for the CRC Efficiency scheme. 

 

CDP (Carbon Disclosure Project) Report – The Accuvio software is independently tested and verified and accredited by the Carbon Disclosure Project globally. The CDP report generates the required tables for the CDP quantities questionnaire questions.

 

GHG Performance Reports: The reports below show total GHG emissions in a user friendly interface with tables and charts. The emissions are analysed by scope, by source category and by input type. The reports, as their names suggest, aggregate the data by year, quarter and month.

  • GHG Performance Report By Year 
  • GHG Performance Report By Quarter 
  • GHG Performance Report By Month 
  • GHG Performance Report All Periods - initially shows by year and then allows the user to drill down into quarter and then month. 
  • GHG Performance Report All Periods, No Charts 
  • GHG Performance Report by Organisation 

 

Meter Reports:

  • Meter Half Hour Data Download Report - Reporting on half hourly meter data. 
  • Meter Report - this report provides all details on Meters within the system for example, meter number, meter type, serial number, quantity, site name, ID, industry sector, country name, address, parent organisation etc. 
  • Drilldown Reports: Drill down reports can be expanded by clicking on the plus symbols displayed on screen. In fact, once the user exports the drill down report to excel, all of the groupings is maintained in that exported excel document. 

Drilldown/Quantity reports:

  • Emissions by Organisation drilldown report provide the organisation emissions by organisation structure. 
  • Emissions by Site drilldown report provide the organisation emissions by geographic structure. 
  • Quantity Data by Organisation 
  • Quantity Data by Site 
  • Quantity reports that aggregate the data by year, quarter and month: 
  • Quantity Data Download 
  • Summary Quantity Report by Year 
  •  Summary Quantity Report by Quarter 
  •  Summary Quantity Report by Month 
  • Quantity and Cost reports that aggregate the data by year, quarter and month: 
  • Quantity and Cost Summary Report by Year 
  •  Quantity and Cost Summary Report by Quarter 
  •  Quantity and Cost Summary Report by Month 

 

Intensity metric reports that aggregate the data by year, quarter and month:

 

  • GHG Intensity Report by Year 
  • GHG Intensity Report by Quarter 
  • GHG Intensity Report by Month 

 

Corporate Social Responsibility Reports that aggregate the data by year, quarter and month:

 

  • CSR Summary Report by Year 
  • CSR Summary Report by Quarter 
  • CSR Summary Report by Month 

 

ESOS Reports:

  • ESOS Drilldown Report – Energy Data by Organisation  
  • ESOS Drilldown Report – Energy Data by Site  
  • ESOS Report – Building Energy Use, By Month  

 

 

EED (Energy Efficiency Directive: Article 8) Reports:

  • EED Energy Use by Inventory  
  • EED Energy Use By Activity  
  • EED Energy Use Audit Status 
  • EED Directors Report  

 

 

Additional reports are available on request.