Interval data scanning can only be setup on half hourly/interval data meters (Electricity, Water or Gas). For all other activities select Non Interval Data.


Data Completeness Checking For An Interval Meter:

Step 1: To setup Data Completeness scanning for Interval data click on the meter (B) in the GHG Activity/Meter screen in the Data Management section by selecting the Data Management icon at the top of the screen and then Meter data button (A) from the drop down. 

 

Step 2: On the activity/meter data screen, click on the Config tab at the top of the screen.


Step 3: Select the Data completeness tab and then click > symbol beside Interval Data - Data Completeness.  Interval scanning can only be setup on half hourly/interval data meters (Electricity, Water or Gas). For all other activities select Non Interval data.


Step 4: Next tick the box to turn on scanning. The system will now scan all interval (half hourly) upload data files that are upload via the bulk or multi upload and provide the results in the Data Quality section under the analysis icon. To set up emails to alert users to the data completeness of half hourly data go to section 4.4.