To set up mass Interval data completeness settings across interval data/AMR meters follow the steps below. Interval data scanning can only be setup on half hourly/interval data meters (Electricity, Water or Gas). For all other activities select Non Interval Data .

Step 1: To begin, navigate to the GHG Activities screen by selecting the Data Management menu icon at the top of the screen and clicking on GHG activities from the drop down. Once on the GHG Activities screen click on the "Settings" button above the chart as shown below. Bulk Activity Settings button is available on the GHG Activities screen, Meters Screen, Transport screen and EED:A8 Screen. Users can go to any of these screens to use the Bulk Settings feature. For this example the GHG activities screen is used.


Step 2: Once the Settings button is clicked a box will appear asking do you want to configure: 


A - Data Completeness

B - Anomaly Testing
C - Email Reminders and Alerts
Select A to configure bulk data completeness settings for Interval Data meters.

 


Step 3:  On the next screen click on the > symbol beside (A) Interval Data - Data Completeness to set up Interval Data scanning.


Step 4: Next tick the box beside the question ‘Enable Data Completeness for AMR data on this Activity’ to turn on scanning. If you wanted to turn off scanning untick the box.



Step 5: On the next screen users will select the meters they wish to apply/turn off the Interval data completeness settings to. There is an activity table that shows all activities in the system if you wish to apply settings to all activities click continue.
If you wish to filter this list use the three filters at the top A (company), B (All Activity Types) and C (All Countries)  to determine what activities you wish to mass apply the data completeness settings to. 
A - Company: By org structure for example  apply data completeness settings to all activities assigned to a certain building
B - By activity types: select a specific activity type  for example Air Transport and apply these settings to all air transport activities in the system. 
C - All Countries: for example select United Kingdom and apply settings to all UK activities. 
These filters can be used together to determine what activities the user wishes to apply settings to. For example select Activity Type: Purchased Used and Electricity and Country type France to apply settings to all electricity activities in France. 
Click Finish (D) when you have selected the activities you wish to mass apply the data completeness settings to. 
 Step 6: The data completeness settings for the selected Interval meters are now being setup, once completed users will receive an email in of completion. Click close to finish the process. The system will now scan all half hourly upload data files that are upload via the bulk or multi upload and provide the results in the Data Completeness section under the Analysis icon.